The Dashboard provides a way to easily assign drivers detected by the Visual Login System. This allows the VLS to complete the required training in order to enable the auto-assignment of drivers to their respective drive times.
The Visual Login Training Dashboard will enable the customer to view the fleet’s Registered Drivers, as well as the number of Trained Drivers, Untrained Drivers, Unmapped Drivers, and New Faces as defined below. To view this page, click Driver Assignment > Visual Login System Training.
Note: Customers can only view their own assigned drivers. For customers with multiple fleets, an individual fleet must be selected.
The Dashboard provides the following information:
Registered Drivers: The total number of drivers registered in the portal for the Fleet.
Trained Drivers: The number of registered drivers for whom Visual Login System training is complete. These drivers are mapped to a Face image that is available in the VLS. These driver images are displayed in the “Mapped Faces” section of the dashboard.
Untrained Drivers: The number of registered drivers for whom the VLS has not completed the training process. This means that the Driver is mapped to a Face Image in the VLS, but the system requires additional training time in order to accurately assign the drive time to the driver. The untrained driver’s name appears in yellow.
Unmapped Drivers: The number of registered drivers for whom VLS training is not complete. These drivers have not been mapped to a Face Image in the VLS. Once this is completed, the system will be able to recognize the driver and complete the VLS training.
New Faces: The number of registered and unregistered drivers for whom Face Images were captured. The unregistered drivers cannot be mapped in the VLS because the drivers’ names have not been added to the portal.
VLS Training
Complete the following steps to train the VLS to recognize new drivers and drivers who have not been previously identified by the system:
Confirm that all new drivers in the fleet have been added to the portal.
Refer to the “Drivers” section of the portal for details on how to add drivers individually or in bulk.
Go to the “New Faces” section of the VLS Training Dashboard.
Select a Face Image to view all associated images for the driver in the right pane of the Dashboard.
Select the appropriate Driver Name from the “Select Driver Name” dropdown menu.
Search for the driver by scrolling down or typing the driver name in the “Select Driver Name” box.
Driver names highlighted in Green indicate that VLS training is complete for that driver.
If the driver’s name is not found, then add a driver in the Driveri portal – see section Identify above.
Once the correct driver has been associated with the proper image, click Save.
The drivers can be found in the “Mapped Faces” section of the dashboard.
The drivers will be added to the Untrained Driver total.
The drivers will be added to the Trained Driver total once the VLS training is complete.
Repeat steps #4-#6 until no more Face Images show under the New Faces.